..1
All items ordered are plus shipping charges by UPS ground.
 |
TT-1 trimmer rack, perfect
for semi-pros and small contractors who only need to carry two trimmers,
or a trimmer and a stick edger.
•Trimmer handle rest is on an angle so that
trimmer will not stay on the rack unless latched.
•1/8" all welded steel construction includes
high grade mounting hardware and durable powdercoat finish.
•Locks trimmers individually with standard padlocks.
•Latch clips are secured to hinge with a lanyard
to prevent loss.
•Mounts to open or enclosed trailers quickly
and easily.
•Attaches to upper and lower rails of trailer
creating much stronger mount than racks that attach to the top rail
only.
TT-1 Only $124.99
|
 |
"TT-2
"Original" (holds 3) you will have peace of mind knowing your trimmers
are protected from theft and damage, yet easily accessible.
Unlike other "wannabe copy cat" racks, the TT-2
can be loaded or unloaded in only two seconds. Trimmers are automatically
latched and tightly clamped in place, completely eliminating any chance
for operator error. There are no time consuming pins to fumble with or
forget.
TT-2 original Only $219.99
|
 |
"TT-2 Pro 4"
(holds 4) you will have peace of mind knowing your trimmers are protected
from theft and damage, yet easily accessible.
Unlike other "wannabe copy cat" racks, the TT-2
can be loaded or unloaded in only two seconds. Trimmers are automatically
latched and tightly clamped in place, completely eliminating any chance
for operator error. There are no time consuming pins to fumble with or
forget.
TT-2 Pro 4 Only $279.99
|
.1
 |
The BR-1 Single Backpack Blower
Rack. Simply hang blower on hook. the automatic latch with
stainless steel spring positively secures the blower. Backrest has holes
for attaching an optional stretch cord.
BR-1 Only $60.99
|
 |
DB-1 Dual
Backpack Blower Rack
The "PRO's" choice. This is the blower rack to
have when space and strength are important. The easy to use automatic positive
latching is "Fast and Foolproof". Simply pull out the knob and raise the
slide to load or unload blowers. Constructed using 1 1/2" steel tubing
and heavy duty components, the DB-1 is rugged enough to stand up to years
of heavy commercial use.
DB-1 Only $149.99
|
 |
ST-1 STIHL
BR Series Blower Rack
The ST-1 is the only rack designed specifically
for the Stihl BR340, BR400 and BR420 blowers. Simply set a BR blower on
the bottom bracket and pivot the top onto the hang pin, then install retaining
pin. Blower is secured at the top and bottom and will not move around.
•Extremely fast "in and out time."
•Locks with a standard Padlock.
•Heavy gauge welded steel construction is plated
for corrosion resistance.
•Mounts to open or enclosed trailers and includes
mounting hardware.
•Retaining pin is secured with a lanyard to prevent
loss.
ST-1 Only $49.99
|
 |
CR-3 Combination Rack
Most damage to handheld blowers, hedge trimmers,
and chainsaws occurs during, not use! The combination rack will increase
the useful life of these tools by protecting them from the abuse they receive
bouncing around in the backs of trucks and trailers.
•Extra heavy guage all welded steel construction
and durable powder coat finish.
•Includes H.D. stretch cord to secure tool.
•Mounts to open or enclosed trailers quickly
and easily.
CR-3 Only $60.99
|
 |
WC-1 Cooler
Rack
Bolt a WC-1 to your open or enclosed trailer
or truck and secure any size cooler using the two,four foot long, one inch
straps with cam lock buckles. One piece 3/16" steel construction
WC-1 Only $49.99
|
 |
HT-1 Accessory
Hand
Tool Rack
Used in conjunction with either one of our trimmer
racks the HT-1 is the low cost answer to storage of rakes, shovels, brooms,
etc. Simple bolt on installation will fit all existing TrimmerTrap Trimmer
Racks.
Also available for enclosed trailers.
•Adjustable width eases installation and includes
assembly hardware.
•Handle holder protects handles and mounts out
of the way on the trailer floor or trailer top rail.
•Holds five tools out of harm's way yet easily
accessible.
•Durable powder coat finish.
HT-1 Only $99.99
|
 |
LH-1 Trimmer
Line Holder
Neatly stores trimmer line out of the way yet
accessibly. Tension on the spool prevents line from unwinding until you
need it. Easily installed on the TT-1 and TT-2 Trimmer Racks or just about
anywhere else. Holds most spool sizes.
LH-1 Only $24.99
|
.
 |
SR-1 Backpack
Sprayer Rack
Backpack sprayers are difficult to deal with
when not being used. They fall over and slide around in the back of your
truck, spill, and get broken and run over by other equipment. The SR-1
will prevent all of these problems. Works for most Solo, Lesco, Echo sprayers,
and more. Heavy gauge 1 1/2" square tube provides super strength. Plated
finish resists chemicals.
SR-1 Only $60.99
|
 |
HS-1 Hedge
Trimmer Rack
The HS-1 will secure and protect both single
and double edge hedge trimmers of any length. The vertical position uses
less trailer space and stores the trimmer up and out of the way, preventing
damage. Trimmers with blades 24 inches and longer can be locked in place
by simply attaching a standard padlock to the blade. A "thru hole" for
a locking pin can be used to secure shorter blades
HS-1 Only $60.99
|
 |
MR-1 Multi-Use
Trimmer Clamp
Every landscape contractor needs at least one
MR-1 Trimmer Clamp. Quickly load or unload trimmers with the flip of a
single lever. The adjustable spring loaded jaws, equipped with large rubber
pads, clamp down for a tight, firm grip on almost any line trimmer or stick
edger. The most important feature of the MR-1 is its versatility. The clamp
and clamp stand are designed as separate parts, and are available separately.
This enables you to inexpensively equip numerous pieces of equipment with
clamp
stands yet purchase only as many clamps as needed. By simply removing a
single pin, the clamp can be removed from its stand and installed into
a different stand. Go from one mower to another or to a work bench in the
shop. You can even install a clamp stand to your truck or trailer to be
used when working on trimmers. How's that for versatility?
MR-1 Only $124.99
|
  |
BB-1-Rider
Blade Blocker
for Riding Mowers and most Stand-on Mowers
Operator controlled mower deck discharge baffle
The first and only discharge baffle designed
to maintain compliance by operating in conjunction with the factory installed
discharge shield on your mower.
With Blade Blocker on your mower you can quickly
open and close the baffle from your seat. Just think, no more blowing grass
clippings off of mulched areas or vehicles. Your properties will look much
better the first time you use Blade Blocker, and your labor to clean up
will be considerably reduced! Best of all your customers will not complain
about grass clippings in freshly mulched areas. The unique design incorporates
a multitude of features that provide versatility and adjustability. Blade
Blocker installs on practically any "zero turn" or "stand on" mower.
BB-1 Only $184.99
|
 |
MB-4 Wall
Mounts
These brackets provide the offset needed to mount
our TT Trimmer Racks trimmer racks inside of enclosed trailers
MB-4 Only $35.99
|
. |
