 |
The SB4000 series
beacons emit high intensity strobe light bursts which easily identify any
utility or emergency vehicle, in all weather conditions. High/Low power
control is standard to provide intensity reduction on demand. Select
one of five safety colors in either the high or low lens profile; the lenses
are completely interchangeable. Choose one of two flash patterns, quad
or double. |
 |
Completely self-contained, no power supply
required, the LEDWIC3A features 15 patterns
and a state-of-the-art random pattern selection mode. A single wire
pattern selection scheme is standard for easy hookup. The LEDWIC3 fits
all standard oval truck body mounts and installs easily with a three-wire
hookup - no external power supply is required. |
 |
Completely self-contained, the SLULTRA
features 8 flash patterns and a state of the art random pattern selection
mode. A single wire pattern selection scheme is standard for easy hookup.
The SLULTRA surface mounts directly to the truck body with only two
mounting screws and installs easily with a three wire hookup
no external power supply is required! |
 |
Completely self-contained, no power supply
required, the LEDWIC3R features 15 patterns
and a state-of-the-art random pattern selection mode. A single wire
pattern selection scheme is standard for easy hookup. The LEDWIC3 fits
all standard oval truck body mounts and installs easily with a three-wire
hookup, 56 High Intensity red colored LED's. |
 |
Completely self-contained, the SLWIC3A
features 15 patterns and a state-of-the-art random pattern selection mode.
A single wire pattern selection scheme is standard for easy hookup.
The SLWIC3 surface mounts directly to the truck body with only two
mounting screws and installs easily with a three-wire hookup. No
external power supply, dot box or mounting grommet is required! |
 |
The LEDWIC3RND
uses56 High Intensity LED's,
self contained, no power supply required, Popular
round in body design, Waterproof
design, random technology Standard
15 Flash patterns, including random pattern
Split LED array, Single wire pattern selection,
Available in Amber, Red and split Amber/Red,
Simple 3 wire hookup, Low current drain,
reverse polarity protection. |
 |
The SLWIC3RND
surface mounts directly to the truck body with only two mounting screws
and installs easily with a three-wire hookup. 56 High Intensity LEDs, extremely
thin SMT design: 0.343" thick, Waterproof design, random technology
15 flash pattern, including random pattern |
 |
The new LEDWIC35A
features 15 flash patterns, including a state of the art random pattern
selection mode. A single wire pattern selection scheme is standard for
easy hookup.
The LEDWIC35 fits into all standard 3x5 in-body truck grommets and
installs easily with a three wire hooku, no external power supply is required! |
  |
The BULL LED is
a compact LED warning signal designed to fit a wide range of applications.
The BULL LED emits wide angle bursts of warning power in any four safety
colors: Amber, Blue, Green, Red or White. The BULL LED can be synchronized
with up to 20 additional BULL LED'S to form a complete warning signal system.
Each BULL LED warning signal can be configured to flash simultaneously
or alternately within the system. A proprietary pattern-selection and synchronization
scheme makes system installation a snap. Available in single or double
stack. |
 |
The Linear Reflector
tube assembly and the polycarbonate lens provide a very wider angle light
beam compared to existing designs. The wide angle beam provides superior
warning power to the sides of the vehicle at intersections - exactly where
the light is needed most! The light output of the Linear Microthin is certified
to exceed SAE standards. Our competitor's clone of the original Nova
Microthin is not SAE certified. |
 |
The LED Microthin
houses 4 of the world's brightest LEDs and Nova's proprietary discrete
optic LED technology that provides the proper beam pattern from each LED,
which is designed to put the light where you need it most. This product
is available in self contained and reote versions. Available in all Aaber
for plowing applications. |
 |
The MICROBAR 360
is also a super low profile lightbar; featuring a 3.8 inch height measurement
on magnetic style and internal ultra-low fresnel dome lenses. The MICROBAR
360 is available in flush mount and magnetic mount versions.
A 30 watt strobe power supply is standard and features a variety of
flash patterns and a unique cycle mode that cycles through all patterns
continuously. |
 |
EZSTROBE is a
3” X 5” strobe head with a built-in power supply. Each EZSTROBE contains
a potted 12 Watt quad flash power supply which delivers a bright and effective
warning signal. |
 |
The Nova Electronics WIC-3SC
is a self contained, fully encapsulated oblong strobe warning signal that
delivers quadruple bursts of extremely intense warning power. The WIC-3SC
does not require a strobe power supply. |
 |
WIC-3RNDSC is
a self-contained, fully encapsulated round strobe warning signal that delivers
quadruple bursts of extremely intense warning power. The WIC3RNDSC
is completely sealed to keep moisture out. A simple two wire hookup to
12 or 24 volts is all you need to complete installation! |
 |
The LIN36RUBSC
series offers a wide angle Linear 36 head and a 13-watt power module,
all contained within a PAR36 rubber housing! The self contained Linear
36 contains a fully encapsulated, 13-watt, field replaceable power module
that delivers 70 quadruple light burst a minute. No external power
supply or cables are required. |
 |
The LEDPAR36 utilizes
Nova's proprietary discrete optic beam focusing technology to deliver a
perfectly tailored warning signal exactly where it is needed most. The
Nova LEDPAR36 is unique in that it can be ordered with the center LED on
a separate circuit; this feature allows for easy hook up of the familiar
X pattern seen on many installations. The center LED can be a different
color than the other LEDs in the LEDPAR36. |
 |
The Hide-a-Flash lamp is the perfect
way to enhance the visibility of any emergency vehicle. The hide-a-flash
lamp is also an easy way to convert a standard vehicle into an emergency
vehicle with the flip of a switch a must for volunteers! Coupled with a
Nova strobe power supply, the hide-a-flash lamp emits brilliant bursts
of light, in your choice of color, for effective vehicle identification
and tracking in any weather condition.
|
 |
The EZHIDE lamp
is the perfect way to enhance the visibility of any emergency vehicle.
The EZHIDE is also an easy way to convert a standard vehicle into an emergency
vehicle with the flip of a switch. Coupled with a Nova strobe power
supply, the EZHIDE lamp emits brilliant burst of light, in your choice
of colors. These 32 watt strobe tubes pop into a 1” diameter hole
- no mounting hardware required. |
 |
The SYSN2 comes
complete with a EPSX404 power supply, two hide-a-flash clear strobe tubes,
and two 15 foot strobe cables. |
 |
The SYSM4 comes
complete with a Micropak404 power supply, four hide-a-flash strobe tubes,
and four 15 foot strobe cables. |
 |
Nova's WIC-3 System 1
series are complete 3 head DOT warning systems that include all components
for a typical DOT installation. These systems are field-proven and can
withstand years of demanding use. Our WIC-3 twist-lock strobe head is 100%
waterproof. Choose a Nova WIC-3 system for your next DOT application. |
 |
EPSX Series
The EPSX Series 40 watt economy strobe light power supplies feature
double flash, quad flash, mega flash and double-quad-Mega cycle repeat
flash patterns standard!
The thermally conductive encapsulant provides efficient heat sinking,
as well as making the power supply vibration-proof and waterproof! The
EPSX Series is the perfect choice for a high-intensity, economical system.
Model EPSX404, 4 head unit. |
 |
Random Flash Power Supply.
The RPM4 Series power supplies offers random pattern selection and
head mapping exclusive features available only in Nova products! The random
pattern selection feature allows the power supply to randomly choose one
of eleven available patterns. The random level, or the number of times
a pattern repeats, is selectable from 4 to 1 by the operator. |
 |
The QuickStrobe
is a versatile, single-head 12 watt strobe power supply that fits in the
palm of your hand. The QuickStrobe can be easily mounted in a variety of
locations even right next to the strobe head it powers eliminating the
need for long cables and time consuming installation work. The QuickStrobe
is water and vibration resistant and is available with waterproof deutsch
connectors. |
 |
90/80/60 Watt, 4 Head, Multi-flash Strobe Light
Power Supply
The multiple flash modes of the X-PAK, from double flash to quintuple flash,
provide the high intensity light bursts that make any emergency vehicle
easily visible in the worst weather conditions. With a rock solid five
year warranty, capable of powering two to four heads with 60, 80, and 90
watts, the X-PAK is a smart choice as the heart of a dependable strobe
warning system. |
   |
Nova offers both rotary and
rocker style switches. One, two and 3 switch mounting
brackets. Switches for on - off, pattern change, and high - low
intensity of the lights. |
