860-537-3431
Colchester, Connecticut
 
Exmark Vantage Stand-On Mower


PRODUCT HIGHLIGHTS

              Available in S or X Series, in a size to fit anyones needs, and the compact
    size allows more units to fit on a single trailer.

    S-Series features:

    • Drive System: Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
    • Speed: Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.
    • PTO Engagement: Warner 200 ft-lb clutch.
    • Fuel Capacity: 8-gallon (30.3-L), single fuel tank with single fill location.
    • Drive Wheel Release: Allows unit movement without engine running.
    • Safety Package: Operator Presence Controls (OPC) with safety interlock system indicators.
    • Casters: .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
    • Cup Holder: Optional.
    • Deck Construction:  10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    • Deck Style:  Full-floating UltraCut Series 3 on 36 inch, and Series 4 on 48, 52, or 60 inch decks. Side discharge standard, with molded discharge chute and option to bag or mulch.
    • Deck Lift:  Standard; mechanical lift-assist springs.
    • Cutting Heights:  1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
    • Blade-Tip Speed:  Approximately 18,500 fpm.
    • Tractor Frame:  Welded, heavy-duty 1.5" x 3" tubular steel.
    • Steering Control:  Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
    • Front Caster Tires:  11 x 4.0-5, smooth-tread, semipneumatic tires.
    • Drive Tires:  18 x 8.5-8 Kenda Tires.
    • Parking Brake:  Lever-actuated bar brake.
    • Blade Spindles:  No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
    • Electrical:  12-volt battery with 15-amp alternator.


    EXMARK VANTAGE S-SERIES MOWER MODELS / ENGINE AND
    CUTTER DECK COMBINATIONS

    VTS541KA363: 36" Ultracut Series 3 Deck, Kawasaki FS541V air-cooled engine
    VTS651KA484: 48" Ultracut Series 4 Deck, Kawasaki FX651V air-cooled engine
    VTS691KA524:  52" Ultracut Series 4 Deck, Kawasaki FX691V air-cooled engine

    EXMARK VANTAGE S-SERIES DIMENSIONS

    S-Series Vantage Product Dimensions: 36" Vantage 48" Vantage 52" Vantage
    Length: 74" 74" 74"
    Width 48" 59.6"  64.8"
    Weight:  790 lbs 855 lbs. 866 lbs.
    Overall Height: 50" 50" 50"
    Warranty 3 year commercial, 
    5 year consumer    		 3 year commercial, 
    5 year consumer    		 3 year commercial, 
    5 year consumer

    X-Series Features:

       
    • Air Filter:  Heavy-duty canister air filtration system.
    • Drive System:  Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors (48" model), and   two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors (52 and 60" models).
    • Speed:  Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.
    • PTO Engagement:  Warner 200 ft-lb clutch.
    • Fuel Capacity:  8-gallon (30.3-L), single fuel tank with single fill location.
    • Drive Wheel Release:  Allows unit movement without engine running.
    • Safety Package:  Operator Presence Controls (OPC) with safety interlock system indicators.
    • Casters:  .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
    • Cup Holder:  Optional.
    • Deck Construction:  10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    • Deck Style:  Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
    • Deck Lift:  Standard; mechanical lift-assist springs.
    • Cutting Heights:  1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
    • Blade-Tip Speed:  Approximately 18,500 fpm.
    • Tractor Frame:  Welded, heavy-duty 1.5" x 3" tubular steel.
    • Steering Control:  Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
    • Front Caster Tires:  11 x 4.0-5, smooth-tread, semipneumatic tires.
    • Drive Tires:  20 x 10.50-8 Kenda Tires
    • Parking Brake:  Lever-actuated bar brake.
    • Blade Spindles:  No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
    • Electrical:  12-volt battery with 20-amp alternator.
EXMARK VANTAGE X-SERIES MOWER MODELS / ENGINE AND
CUTTER DECK COMBINATIONS
VTX651KA484: 48" Ultracut Series 4 Deck, ECS Handles, and aKawasaki FX651V air-cooled engine
VTX691KA524: 52" Ultracut Series 4 Deck, ECS Handles, and a Kawasaki FX691V air-cooled engine
VTX730EKC524:  52" Ultracut Series 4 Deck, ECS Handles, and a Kohler ECV730EFI fuel injected engine
VTX740EKC604: 60" Ultracut Series 4 Deck, ECS Handles, and a Kohler ECV740EFI fuel injected engine

EXMARK VANTAGE X-SERIES DIMENSIONS

X-Series Vantage Product Dimensions: 48" Vantage 52" Vantage 52" Vantage W/
Kohler EFI		 60" Vantage W/
Kohler EFI
Length: 74" 74" 74" 74"
Width 59.6" 64.8"  64.8" 72.8"
Weight:  855 lbs 866 lbs.  875 lbs. 883 lbs.
Overall Height: 50" 50" 50" 50"
Warranty 3 year commercial, 
5 year consumer		 3 year commercial, 
5 year consumer		 3 year commercial, 
5 year consumer		 3 year commercial, 
5 year consumer
 

 
The Areas Leader in Commercial and Residential Equipment!